why you shouldn't attempt restoration repairs yourself

Home damage is caused by many different sources. It could be from a fire, flood, moisture, insects or severe weather; but no matter the cause, restoration work will need to be completed. So, how do you know that the house is going to be livable again after such damage is sustained? Finding a reliable and professional restoration company to do the work for you is really the only course of action that you can take. When damage is this extensive, it is nearly impossible to be sure that doing the repairs yourself will take care of the damage the right way. Visit my blog to find out what you could miss if you attempt to make these repairs on your own.

3 Tips For Removing Mold From Hardwood Floors

Blog

When you have a flood or roof leak in your home, one of the biggest dangers is having mold develop, which occurs with a high amount of water and moisture. It can be disastrous to hardwood floors, often requiring replacing the damaged areas. However, if you are quick to dry the floors and remove traces of surface mould, you might be ale to save them. Here are some helpful tips for removing mold from the hardwood floors.

Dry Out the Floors

If the floors are still wet, you need to put a stop to more mould growth before you do anything else. Dry out the floors by getting as much air into the room as possible. Open all of the windows and doors first. Turn on your heating unit on high with it as hot as it will go, and turn on any fans or ceiling fans you have in that room. This will allow you to get as much air flow in the room as possible while you try to dry out the floor. This should stop the growth in its tracks.

Start With the Surface Mold

Begin cleaning and removing the mold as soon as possible, starting with surface mold. This is mold you can clearly see on the top of the hardwood planks. Once it seeps deep into the wood, you often need to replace those areas of the floor. As soon as you see the surface mould, clean it with a mixture of bleach and water. Wear plastic gloves to protect your hands during this procedure, both from the mold and the bleach. Mold is toxic, so you should also wear a face mask so you don't inhale the fumes. Use a scrub brush to scrub away the mould with your water and bleach solution, then rinse it well and wait for it to dry.

Use a Power Washer

When the mould goes beyond the surface, but you want to try and save the wood, the next best thing is to use a power washer. You need to be careful when using this method as you put the floor at risk of more mould growth since you are adding more moisture to it. Make sure the entire area of the floor is emptied, including furniture, so it doesn't get damaged by the water. The power washer may help to remove mold that has penetrated deep into the wood. Once you have used the washer, remove the water by using a shop vac, and once again dry it out completely.

Click here for more on mold remediation or do an online search. 

 

Share

9 February 2016